Single Suction Centrifugal Slurry Pump Solid Mining With 20 Inch
Inlet
Rubber liner solid slurry pump
Can replace pump
Product overview
Single stage, single suction, overhang shaft, centrifugal,
double-casing horizontal pump, Wet ends are made of abrasive
resistant hard metal or rubber.
Base- High strengthened base is connected with Frame Plate by
bolts; The Adjusting Bolt under the Bearing Assembly realize easy
adjustment to impeller clearance.
Bearing Assembly:
-High rigidity shaft to handle heavy duty work condition;
-Cartridge bearing assembly jointed with base by bolts;
-Grease Lube bearings fitted in sealed bearing housing, the two
labyrinth on both ends prevent the grease from contamination.
Shaft Sleeve - Clearance fit between solid solution treated
stainless steel shaft sleeve and shaft as well
as the O-rings on both ends prevent the shaft from abrasion and
erosion.
Casing - Made of Gray Iron or Ductile Iron, Ribs help casing to
stand high pressure.
Impeller - Pump out vanes on both shrouds reduces recirculation and
seal pressure.
Wet Ends - Impellers, liners, volutes made of High-Chrome alloy or
rubber, both materials are interchangeable.
Type meaning
| Type meaning for mineral centrifugal slurry pump |
| 20 / 18 TU-R |
| 20 | Pump inlet size (inch ) 3 |
| 18 | Pump outlet size (inch)2 |
| TU | Bracket type |
| slurry pump |
| R | R-Rubber liner pump |
Performance
| (R) | L(R), M | HH | SP(R) | G | AF Series |
| 1.5/1B-(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
| 2/1.5B-(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
| 3/2C-(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
| 4/3C-(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
| 6/4D-(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | |
| 6/4E-(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | |
| 8/6E-(R) | 10/8 R-M | 6S-H | | 14/12T-G | |
| 8/6R-(R) | 10/8 E-M | 8/6S-H | | 16/14 G-G | |
| 10/8F-(R) | | 8/6X-H | | 16/14TU-GH | |
| 10/8X-(R) | | 6S-HP | | 16/14H-GH | |
| 12/10ST-(R) | | 8/6S-HP | | 18/16G-G | |
| 14/12ST-(R) | | 8/6X-HP | | 18/16TU-GH | |
| 16/14TU-(R) | | | | | |
| 20/18G(TU)-(R) | | | | | |
Application
The vertical sump pumps are designed for delivering corrosive,
large particle and high density slurries.
The pumps are widely used in metallurgy, mining, coal, power plant,
building materials and environmental
protection industrial departments, etc.
