Corrosion Resistance Vertical Sump Pump 65QV - SP

Product Introduction

The foam pump is suitable for use in a variety of flotation processes and is an ideal pump for the delivery of foam-like slurries. The conveying capacity is far superior to other forms of products and does not require any shaft seals and shaft seals. This type of pump is suitable for metallurgy, mining, coal, chemical and other industries. It is used to transport high-corrosion and high-corrosion-resistant slurry containing foam. Its transmission part is common with EVM (R) type slurry pump.

Type meaning

65 QV (L) - SP (R)
65---------------Discharge Diameter (mm)
QV---------------Support Type
L-----------------Extension type
SP---------------Sump pump
R-----------------Rubber lined

Specifications

Installation

(1) The pump must be mounted on a solid foundation and tighten all anchor bolts to withstand the full weight of the pump and eliminate vibration.

(2) The piping is supported separately and should be concentric with the pump flange.

(3) Rotate the shaft by hand according to the direction of rotation of the pump. When the shaft drives the impeller, there should be no friction. Otherwise, the impeller clearance should be adjusted.

(4) Disconnect the pump from the motor and check the motor steering to ensure that the pump rotates in the direction of the arrow marked on the pump body. Note that the pump does not allow reverse rotation, otherwise the impeller threads will trip, causing damage to the pump.

(5) When the belt is driven, the V-belt must be applied with a certain pre-tightening force; the pump shaft should be parallel with the motor shaft so that the V-belt is in the same direction as the end face of the pulley to avoid violent vibration and wear. For direct drive: the pump shaft and motor shaft must be accurately centered, otherwise it will cause vibration or damage the bearing.

Performance Chart

Construction Drawing

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.