River Suction Pump,Sand Gravel Pump For Dredging And Pumping Gravel

Product Introduction

G(H) type gravel pump adopts single-pump shell structure with cassette connection, and the over-flow passage is wide

The flow component is made of hard nickel and high chromium wear resistant alloy

Gravel pump outlet direction can be adjusted as needed

Mainly used to transport strong abrasive slurry containing large particles

Specification

Application

-dredging

-sifting gravel

-dredging rivers

-mining

-metal smelting

-blasting

Type meaning for dredge pump

6 / 4 D-G(H)

6----------------Suction Diameter (inch )

4----------------Discharge Diameter (inch)

D----------------Support Type

G----------------Pump Model

H----------------Gravel Pump High Head

Structure Features:

1. This series of gravel pumps is a centrifugal pump with horizontal and single pump shell structure. It is also a kind of slurry pump in a broad sense.

2. The pump body and the pump cover are clamped by a special clamp. The discharge direction of the pump can be at any position of 360 degrees, which is convenient to install and use.

3. The bearing assembly of the gravel pump adopts a cylindrical structure, which is convenient for adjusting the gap between the impeller and the pump body, and can be completely removed during maintenance.

4. The bearing is greased.

5. There are three types of shaft seals for gravel pumps: packing seals, impeller seals, and mechanical seals.

6. The gravel pump has a wide flow path, good cavitation performance, high efficiency and wear resistance.

7. Transmission modes mainly include: V-type V-belt drive, flexible coupling drive, gear reducer drive, fluid coupling drive, thyristor speed control, etc.

8, over-current parts material: nickel-containing high chromium wear-resistant alloy.

9, using a variety of speeds and a variety of variants, so that the pump operates under optimal conditions.

10, long service life, high operating efficiency, can meet a variety of poor transport conditions.

G(H) gravel pump material list for parts:

Performance table:

Construction Drawing

Selection & Performance Chart

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.